Compared with other valves, the butterfly valve has a simpler structure. It is smaller in size, lighter in weight, and has fewer components. It relies on several key components to form a butterfly valve, but it has achieved better use.

Do you want to know how to make butterfly valve? Butterfly valves work to open, close or decrease flow via piping products with a turn of 90 degrees or much less. Their layout functions a disc mounted on a rod.

No matter what the butterfly valve development trend is, it is an unchangeable fact that the butterfly valves are highly valuable to a lot of industries, the auto field in particular.

Butterfly valve is a valve that uses a circular disc as a shutter to open, close, and adjust the fluid passage as the stem rotates. The butterfly valve's disc is mounted in the diameter direction of the pipe.

Butterfly valves are used in a wide range of applications and are suitable for flow regulation. Because the butterfly valve has a large pressure loss in the pipeline, it is about three times that of the gate valve. Therefore, when selecting a butterfly valve, the influence of the pressure loss of the piping system should be fully considered.

The butterfly valve is suitable for flow regulation. Since the pressure loss of the butterfly valve in the pipeline is relatively large, it should also be considered that the butterfly plate is subjected to the firmness of the pressure of the pipeline medium when it is closed.

The butterfly valve has the characteristics of simple structure, small volume, light weight, material consumption, small installation size, rapid switch, 90° reciprocating rotation, small driving torque, etc. It is used to cut off, connect and adjust the medium in the pipeline.

The rubber elastomer in the butterfly valve may cause tearing, abrasion, aging, perforation or even falling off during continuous use. The traditional thermal vulcanization process is difficult to adapt to the needs of on-site repair valves.

The butterfly valve is also widely used. If it is used to control the flow, it needs to choose different types and the size of the valve body. Butterfly valves are widely used not only in general industries such as petroleum, gas, chemical, and water treatment, but also in cooling water systems.

The butterfly valve has a small flow resistance when fully opened. When the opening is between about 15° and 70°, sensitive flow control is possible, so the application of butterfly valves is very common in the field of large-diameter adjustment.