The opening and closing member of the gate valve is a gate. The direction of movement of the gate is perpendicular to the direction of the fluid. The gate valve can only be fully open and fully closed, and cannot be adjusted and throttled.
The function of the check valve is to prevent back flow of the medium in the pipeline. The check valve is an automatic valve type, and the opening and closing member is automatically opened or closed by the force of the flowing medium.
Compared with other valves, the butterfly valve has a simpler structure. It is smaller in size, lighter in weight, and has fewer components. It relies on several key components to form a butterfly valve, but it has achieved better use.
Butterfly valves are used in a wide range of applications and are suitable for flow regulation. Because the butterfly valve has a large pressure loss in the pipeline, it is about three times that of the gate valve. Therefore, when selecting a butterfly valve, the influence of the pressure loss of the piping system should be fully considered.
The butterfly valve is suitable for flow regulation. Since the pressure loss of the butterfly valve in the pipeline is relatively large, it should also be considered that the butterfly plate is subjected to the firmness of the pressure of the pipeline medium when it is closed.
The butterfly valve has the characteristics of simple structure, small volume, light weight, material consumption, small installation size, rapid switch, 90° reciprocating rotation, small driving torque, etc. It is used to cut off, connect and adjust the medium in the pipeline.