China Valves Manufacturer , Industrial Valves Supplier.

The gate valve has not changed much in the past 100 years, but it has played an important role in the production facilities of refineries, chemical plants, power stations and industrial enterprises around the world.

The driving mode of swing check valve is automatic, the connection mode can be selected from flange, clip type, welding, thread, structure can be selected with swing type, sealing structure can be selected with PTFE, PPL, hard seal, pressure range PN10~ PN160, the nominal diameter is DN15-1200mm, the material can be selected from WCB, 304, 316, alloy steel and so on.

The valve flap of the swing check valve rotates around the rotating shaft. Its fluid resistance is generally smaller than that of the lift check valve, which is suitable for larger diameter applications.

The wafer butterfly valve must first be laid flat before installation. In the design of the on-site pipeline, no special permission is allowed to disassemble the wafer type butterfly valve.

The valve stem axis simultaneously deviates from the disc center and the body center, and the valve seat turns the axis and the valve body channel axis has certain Angle, is called the Triple offset butterfly valve

The axial center of the valve stem is simultaneously deviated from the center of the disc and the center of the body, and the rotation axis of the valve seat has a certain angle with the axis of the valve body passage, which is called triple offset butterfly valve.

Since the introduction of the triple offset butterfly valves for more than 50 years, these 50 years have been continuously developed, and the application of butterfly valves has spanned many industries.

The double offset butterfly valve is characterized in that the shaft center of the valve stem is offset from both the center of the disc and the center of the body. The double offset effect allows the disc to be quickly disengaged from the valve seat after the valve is opened, which greatly eliminates unnecessary over-squeezing and scraping of the disc and the valve seat, reduces the opening resistance, reduces wear and improves the seat life.

The butterfly valve is also widely used. If it is used to control the flow, it needs to choose different types and the size of the valve body. Butterfly valves are widely used not only in general industries such as petroleum, gas, chemical, and water treatment, but also in cooling water systems.