China Valves Manufacturer , Industrial Valves Supplier.

CALL US

+86-593-2756887

OPENING TIME

9:00-18:00 Mon-Fri GMT+8

EMAIL US

Home » News » Product News » The Working Principle of Industrial Valve

Search for Your Interests

The Working Principle of Industrial Valve

Author:Site Editor     Publish Time: 2021-04-16      Origin:Site

The industrial valve is a kind of common component in electric actuator. The typical industrial valve is composed of butterfly valve, ball valve as well as plug valve. Due to the different classifications of industrial valve, the industrial valve working principles are various.

 

List of content for this article

1.The industrial valve types.

2. Industrial valve working principle.

 

 

The industrial valve types

However, as a kind of necessary component of electric actuators, the industrial valve can be classified into two types. The industrial valve possesses small magnitude and thin width. The industrial valve in this size is able to be on off state, so it is necessary to match up with suitable valve seat and valve electric actuators.

 

Due to the small size of the thin industrial valve, it is possible to use direct screw to like three connecting flanges. And the high pressure will swell the screws, so it is impossible for liquid inside of it to leak. When there is something wrong with the industrial valve such as too high temperature causing swelling, or not suitable control valve, it is possible to use thin valve instead.

 

Another type of the industrial valve is lug type valve, which has a hole on the flange with the same diameter of the hole on butterfly valve. And the function of the holes is to insert other kinds of valves to connect. Only after making sure that double bolts have been matched up with whole flange is able to install flange on the valve. In addition, the plug valve can only be used to replace direct screws which are swell die to high heat or the sizes of other valves are not suitable.

 

 

Industrial valve working principle

In addition, another industrial valve working principle is to use tooth shape sealing surface to consolidate and make sure the situation of the flange between pipeline and industrial valves. And the inner magnitude of the industrial valve should be close to that of the pipeline. This kind of design is able to contain water current as much as possible. In addition, there is a process treatment designed inside of industrial valve to filter the impurities in the middle of delivering liquid.

 

After knowing the industrial valve working principle, it is possible to manufacture components like industrial valve with low production cost so as to gain more profit. And both of the structure as well as appearance of the industrial valve should be promoted at the same time based on the principle of respecting the basic industrial valve working principle.

 

The industrial valve is a kind of necessary component inside of pneumatic actuators. Therefore, with the increasing demand of electric actuator, the demand of industrial valve has been promoted correspondingly. And apart from the appearance as well as structure of the industrial valve, the only stable factor is the industrial valve working principle. Therefore, the industrial valve working principle is a favorable way to understand the features as well as functions of the industrial valves.


Contact us

Subscribe for Newsletter

Subscribe to our email list and stay upto date with all our latest updates.
Copyright © 2018.Ningde Hangna Industrial Co.,Ltd. All Rights  Reserved. 
Supported by Leadong   Sitemap