China Valves Manufacturer , Industrial Valves Supplier.

The industrial valves are in the fluid system. The device used to control the direction, pressure, and flow of the fluid is the device that allows the flow and stops of the medium (liquid, gas, powder) in the pipe and equipment and can control its flow. The valve is the fluid delivery system.

The yoke is a part of a swing check valve that is used to support the valve flap and to rotate the valve disc about a pin mounted on the valve body to open and close the valve.

The main advantage of the lift check valve is its simple construction. Since the conical disc is the only moving part, the valve is durable and requires little maintenance, and because it is a metal seat, there is little wear.

Lift check valve: A valve that check valve slides along the center line of the valve body. Pipeline check valve is a new type of valve. It is small in size, light in weight and good in process ability.

Typically, lift check valves are automatic valves that open under the pressure of fluid in one direction and act to prevent flow when the fluid flows in the opposite direction. The valve flap of the lift check valve is on the sealing surface of the valve seat, and its valve can be automatically raised and lowered.

Lifting check valve: The check valve sliding along the vertical center line of the valve body. The internal thread check valve can only be installed on the horizontal pipe.

The working principle of the swing check valve is somewhat similar to the shut-off valve. The passage of the fluid through the lift check valve is also narrow, so the pressure through the lift check valve is larger than that of the swing check valve, and the swing is started. The flow rate of the check valve is limited.

The function of the check valve is to prevent back flow of the medium in the pipeline. The check valve is an automatic valve type, and the opening and closing member is automatically opened or closed by the force of the flowing medium.

Piston-type check valves are automatic valves that open under the pressure of fluid in one direction, and the valve flaps to prevent its flow when the fluid flows in the opposite direction.