China Valves Manufacturer , Industrial Valves Supplier.

CALL US

+86-593-2756887

OPENING TIME

9:00-18:00 Mon-Fri GMT+8

EMAIL US

Home » News » Product News » The way to disassemble ball valve

Search for Your Interests

The way to disassemble ball valve

Author:Site Editor     Publish Time: 2018-11-22      Origin:Site

A ball valve in ball valve city market is specialized to control fluids below higher pressure or higher temperatures. A ball valve of pneumatic actuators is utilized to control fluids in possibly a pipe delivery method or throughout production.

 

The pattern of the ball valve is advantageous for controlling big volumes of fluid below higher stress and at higher temperature. They are effortless to set up and have a extended provider existence, producing them economical in the numerous companies in which they are discovered, from substance and essential oil crops to pharmaceutical and beverage firms.

 

Ball valves in ball valve city market simplify the control of contents below higher stress and provide a higher degree of control, and they are effortless to disassemble and fix when troubles arise.Turn away the whole delivery method or reroute any fluids to an further component of the method even though the ball valve is becoming serviced. Examine any stress and temperatures gauges to confirm that the valve is safe and sound to disassemble prior to commencing.

 

Eliminate 4 pipe screws and nuts from the pipe on one side of the ball valve, and then do the exact to the pipe on the other side of the valve. Eliminate the ball valve assembly from the pipe method and proceed it to a flat region with lots of room to work.

Unscrew the hex jam nut from the stem at the best of the ball valve assembly, and remove the spring washers. Eliminate the valve control by drawing it up away the stem. Eliminate 4 hex nuts holding the entire body end plate to the best of the valve assembly, and draw if away.

 

Eliminate 4 nuts and entire body screws from the valve entire body and draw apart the entire body sufficient to draw out the ball assembly. Pull away the sequence of spring washers from the stem, put into practice by an further sequence of packing rings, a packing retainer, an O-ring and a ball seat. Lay each and every element apart in purchase of elimination so they can be simply re-installed into the valve method.

 

Eliminate two further ball seats, one from the within of each and every 50 % of the valve entire body, put into practice by an further O-ring for each and every ball seat. Unscrew the stem from the ball to total the dis-assembly.


Contact us

Subscribe for Newsletter

Subscribe to our email list and stay upto date with all our latest updates.
Copyright © 2018.Ningde Hangna Industrial Co.,Ltd. All Rights  Reserved. 
Supported by Leadong   Sitemap